Adhesives & Sealants

LC-60 BONDING ADHESIVE

LC-60 BONDING ADHESIVE

A high-strength, solvent-based contact adhesive that allows quick bonding of cured flashings and membranes to various substrates.

More Details
TPO BONDING ADHESIVE

TPO BONDING ADHESIVE

A high-strength, solvent-based contact adhesive that allows bonding of TPO membrane to various porous and non-porous substrates.

More Details
LOW-VOC BONDING ADHESIVE & LOW-VOC BONDING ADHESIVE 1168 (EPDM & TPO)

LOW-VOC BONDING ADHESIVE & LOW-VOC BONDING ADHESIVE 1168 (EPDM & TPO)

A high-strength, solvent-based contact adhesive that allows bonding of all EPDM and TPO membrane to various porous and non-porous substrates. Low-VOC Bonding Adhesive meets the <250 gpl VOC content requirements of the OTC Model Rule for Single-Ply Roofing Adhesives. Low-VOC Bonding Adhesive 1168 meets the requirements for SCAQMD regulations.

More Details
LOW-VOC PVC BONDING ADHESIVE

LOW-VOC PVC BONDING ADHESIVE

A high-strength, solvent-based contact adhesive that allows bonding of PVC and KEE-enhanced PVC membrane to various porous and non-porous substrates. This product also meets the <250 gpl VOC content requirements of the OTC Model Rule for Single-Ply roofing adhesives.

More Details
PVC HYDROBOND™ WATER-BASED ADHESIVE

PVC HYDROBOND™ WATER-BASED ADHESIVE

A water-based, wet lay-in, one-sided dispersion adhesive that is used to secure PVC membranes to a variety of substrates.

More Details
DASH™/XPAND ADHESIVE

DASH™/XPAND ADHESIVE

A low-rise, two-component, insulating polyurethane adhesive. It can be used to adhere a variety of insulations and membranes.

More Details
AQUA BASE 120

AQUA BASE 120

A semi-pressure-sensitive water-based adhesive. This product may be used as a two-sided contact adhesive with EPDM and TPO membranes.

More Details
SOLVENT-FREE EPDM BONDING ADHESIVE

SOLVENT-FREE EPDM BONDING ADHESIVE

A high-strength, low-odor, polymer-based adhesive that allows fast installation of EPDM membranes and cured flashings to various substrates. This adhesive is specially designed for installing (black and white) non-reinforced EPDM membranes.

More Details
DASH/XPAND DUAL TANK

DASH/XPAND DUAL TANK

A two-component, construction-grade, lowrise polyurethane adhesive designed for bonding Fleece membranes and/or insulation to various substrates. Applied in spatter spray or beads.

More Details
ACRYLIC WATER-BASED BONDING ADHESIVE

ACRYLIC WATER-BASED BONDING ADHESIVE

A unique synthetic bonding adhesive specifically formulated to replace comparable solvent-based adhesives in the RV, Modular and Commercial Roofing industries. It exhibits excellent adhesion to EPDM membrane.

More Details
COLD-APPLIED ADHESIVE

COLD-APPLIED ADHESIVE

An asphalt-modified polyether, one-sided, wet lay-in adhesive designed to adhere to fleece AC membranes and modified base sheet.

More Details
EPDM X-23 LOW-VOC BONDING ADHESIVE

EPDM X-23 LOW-VOC BONDING ADHESIVE

A high-strength, solvent-based contact adhesive that bonds EPDM membranes to various porous and non-porous substrates. This product meets the <250 gpl VOC content requirements of the OTC Model Rule for Single-Ply Roofing Adhesives.

More Details
CAV-GRIP

CAV-GRIP

CAV-GRIP is a multi-purpose contact adhesive/primer recommended for enhancing the bond of 725TR Air and Vapor Barrier. CAV-GRIP can also be used as a primer for unexposed asphalt.

More Details
TPO PRIMER

TPO PRIMER

A high-solids, clear polymer-based primer used to prepare TPO membrane prior to the application of TPO pressure-sensitive products.

More Details
LOW-VOC PRIMER

LOW-VOC PRIMER

Designed for one-step cleaning and priming of EPDM and TPO surfaces prior to the application of P&S and pressure-sensitive products. It is a Low-VOC product that is ideal for use where environmental issues are a concern.

More Details
CCW-702 AND CCW-702LV* PRIMERS

CCW-702 AND CCW-702LV* PRIMERS

Solvent-based, high-tack adhesives specifically designed to promote maximum adhesion of 725TR Air and Vapor Barrier to approved substrates. They are also used as a surface prep to promote adhesion with DASH/XPAND Adhesive.

More Details
BLACK & WHITE LAP SEALANTS

BLACK & WHITE LAP SEALANTS

The consistency enables it to expand and contract with membrane movement without loss of adhesion. Lap Sealants may be used to seal mechanical terminations, the cut edges of Reinforced EPDM membranes and for sealing at splice intersections. Lap Sealant must be applied and feathered on all seam edges by the end of the working day.

More Details
WATER CUT-OFF MASTIC

WATER CUT-OFF MASTIC

A one-component, low-viscosity, self-wetting, butyl-blend mastic designed to be used in conjunction with roofing and waterproofing systems. It is primarily used as a sealing agent between various membranes and substrates for compression type terminations.

More Details
WEATHERED MEMBRANE CLEANER

WEATHERED MEMBRANE CLEANER

Used to clean both new and in-service EPDM membrane and TPO membrane prior to the welding process. It helps to loosen and remove dirt and other contaminants from the surface of the membranes and leaves a suitable surface for application of adhesive or primer. Please refer to the Technical Data Bulletins for specific instructions for EPDM and TPO applications. Membrane cleaner is clear in color.

More Details
PVC MEMBRANE CLEANER

PVC MEMBRANE CLEANER

This cleaner is specially formulated to clean both new and in-service PVC membrane.

More Details
CUT EDGE SEALANT

CUT EDGE SEALANT

TPO CUT EDGE SEALANT A free-flowing polymeric material designed for sealing cut edges (exposed fabric) of TPO membrane.

More Details
SPLICE ADHESIVE (BLACK)

SPLICE ADHESIVE (BLACK)

Designed for splicing cured-to-cured EPDM membranes and non-PS flashings, this high-strength, solvent-based contact cement allows quick bonding of flashing, sheeting, and cured rubber seams. Formulated for application with a ." medium nap roller and/or a ."-thick paint brush, the versatile tack time allows large areas to be coated and adhered at one time.

More Details
BLACK ONE-PART POURABLE SEALER

BLACK ONE-PART POURABLE SEALER

A single-component, moisture-curing, elastomeric polyether sealant that is compatible with EPDM membranes. It is designed to provide a flexible, durable and long-lasting seal around hard-to-flash penetrations.

More Details
WHITE ONE-PART POURABLE SEALER

WHITE ONE-PART POURABLE SEALER

A single-component, moisture-curing, elastomeric polyether sealant that is compatible with white EPDM, TPO and PVC membranes. It is designed to provide a flexible, durable and long-lasting seal around hard-to-flash penetrations. The sealant’s consistency allows for quick pocket filling without mixing. Unused sealant is usable for up to 30 days if pouch is resealed with original cap. White one-part pourable sealer is white in color.

More Details

Copyright © Top Spec 2017